What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 01:57

At one ohm, the resistor has a maximum of 1 watt power.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One
Why does NASA's Perseverance rover keep taking pictures of this maze on Mars? - Space
eight
The MOV will conduct when the voltage exceeds 50% of line voltage.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The Surprising Way Five Days Of Junk Food Impacts Your Brain - MindBodyGreen
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A circuit breaker is similar, but is resettable.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Exclusive: Clean energy investment hits new highs and shows no sign of slowing - TechCrunch
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At least they know the answer if they wanted it.
Are you able to lie, even though you have Aspergers?
This is where the MOV conducts again, and dissipated the energy.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Upvotes:
There are two important concepts here.
(Dc diagram shown, AC is similar).
It also is a device that limits the change in current flow.
It seems Mohan does not understand the difference between a comment and an Answer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Do narcissists love their children?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
But… the neutral is now “floating” because of the 1 ohm resistance.
the problem then depends on "how fast does the fuse operate?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–14 [Omar Gharbi Omar Gharbi ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is the most offensive thing someone has ever asked you?
[old diagram got deleted by accident]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This 1 Kitchen Tool Can Help You Cut Back On Oil & Calories, Dietitian Says - TODAY.com
Barnstars:
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does the Bible say about the Antichrist? How will we know when he arrives on the scene?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
For this case there are devices called Metal oxide varistors (MOV).
A fuse is a non-resetable over current circuit protector.
what exactly is a ‘surge’ protector?
Now when you have a certain ac resistance, then a current flows in a loop.
First Sentence:
How many women have accidentally pooped their pants and became turned on afterwards?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
but this device (an Inductor) … impedes the rapid changes in the current.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
[image of Common-mode choke]
2024–10–10[John johnson John Johnson ]
2024–10–16 [ OO OLAOYE OYEBODE ]
These devices are installed between the “hot” and “neutral” and protective ground.
The other is “what does a “fuse” do?”
but I think this circuit , shows a few more pieces.
The bolt then partially travels down the line to your home.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But it can get overloaded, and no longer works.
He then describes the function of a fuse.
What is lightning?
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then asserts :
Here is a simplified AC power diagram.
nine
These are simplified answers to the original question, and does not change anything I wrote above.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is 'the assistant's answer'
Edit 2024–10.
The third is lightning and “how it gets conducted into a home.”
An AC voltage/ current source, and an ac inductive load.
a photo is worth a thousand words.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
In schematic diagrams this is the symbol for a fuse:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is where this question deviates from being a 'generic' question, and becomes more specific.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Because the load is inductive, the current lags the voltage.(by a bit).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This device then solves the entire problem.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What does a fuse do?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes Rainy Season and Lightning.
This one hit behind the barn.
so, what happens?
There are three different concepts here that are getting confused.